Atari kabely

Moderátoři: astalavista, tomtom, Monty, Mikeš

Uživatelský avatar
astalavista
Site Admin
Příspěvky: 25
Registrován: 18 kvě 2019, 15:27
Bydliště: Strakonice

Atari kabely

Příspěvek od astalavista » 27 říj 2022, 23:02

SPECIAL ATARI COMPUTER CABLES
(Version 2003-08-14)


I. Interconnecting Cables

1. connecting CASIO diary to Atari 800 XL/XE [author: Olda Rezler, JRC]:

SIO 13 f <-> JACK 3.5 m stereo
pin 3 (Rx-Tx) apex
pin 5 (Tx-Rx) middle ring
pins 4,6 (GND) ring


2. connection between Atari 800 XL/XE and Falcon030 [5 V serial port only!]:

SIO 13 f <-> CANON 9 f
pin 3 (Rx-Tx) pin 3
pin 5 (Tx-Rx) pin 2
pins 4,6 (GND) pin 5


3. connecting Atari XF 551 disk drive to Atari ST [for use with XFormer]:

SIO 13 f <-> CANON 25 m
pin 2 (clock) pin 3
pin 3 pin 11
pin 4 (GND) pin 18
pin 5 pin 5
pin 7 pin 7
pin 12 pin 1


4. connection of 2 ST, TT, Falcon, ... computers via RS-232 [= nulmodem]:

CANON 25 f <-> CANON 25 f
pin 2 (Tx-Rx) pin 3 {white}
pin 3 (Rx-Tx) pin 2 {green}
pin 4 (RTS-CTS) pin 5 {white}
pin 5 (CTS-RTS) pin 4 {red}
pin 7 (GND) pin 7
pin 8 (DCD-DTR) pin 20 {white}
pin 20 (DTR-DCD) pin 8 {blue}


5. PortLink 2 parallel cable to connect Atari Portfolio to Atari ST, TT, Falcon [source: Lars-Erik]:

Portfolio Atari ST
CANON 25 f <-> CANON 25 f
pin 2 (Data) pin 2
pin 3 (Clock) pin 3
pin 12 (Clock) pin 8
pin 13 (Data) pin 9
pin 18 (GND) pin 18
pin 18 - connected via LED to pin 12 (+)


6. connecting Epson GT scanner to Atari ST [source: CDS]

(Midi In) (Parallel)
DIN 5 m <-> CANON 25 m <-> CENTRONICS 36 m
pin 1 (Strobe) pin 1
pin 2 (Data 0) pin 2
pin 3 (Data 1) pin 3
pin 4 (Data 2) pin 4
pin 5 (Data 3) pin 5
pin 6 (Data 4) pin 6
pin 7 (Data 5) pin 7
pin 8 (Data 6) pin 8
pin 9 (Data 7) pin 9
pin 10 (Ack.) pin 10
pin 11 (Bussy) pin 11
pin 12 (P. End) pin 12
pin 13 (Select) pin 13
pin 14 (Autof.) pin 14
pin 15 (Error) pin 32
pin 16 (Init.) pin 31
pin 4 pin 17 (S.Input) pin 36
pins 18-25 (GND) pins 19-29, 33
pin 5 - connected via 2k ohm resistor to pin 4


7. connecting more joysticks to STE a Falcon [source: Moje ST 3/1991]:

CANON 15/DB 15 m <-> CANON 9 m (0/2) -> CANON 9 m (1/3)
pin 1 (UP 0) pin 1 {white}
pin 2 (DN 0) pin 2 {blue}
pin 3 (LT 0) pin 3 {orange}
pin 4 (RT 0) pin 4 {yellow}
pin 6 (FIRE 0) pin 6 {green}
pin 9 (GND) pin 8 pin 8
pin 1 (UP 1) pin 1 {white}
pin 2 (DN 1) pin 2 {blue}
pin 3 (LT 1) pin 3 {orange}
pin 4 (RT 1) pin 4 {yellow}
pin 6 (FIRE 1) pin 6 {green}



II. Audio/Video Cables

1. A/V cable for Roadstar pocket TV to use with Atari XL/XE:

DIN 5 m <-> JACK 3.5 m stereo
pin 2 (GND) ring
pin 3 (Audio) middle ring
pin 4 (Video) apex


2. SCART cable for Atari 800 XL/XE - mono:

DIN 5 m <-> SCART 21 m
pin 2 (GND) pins 4,17
pin 3 (Audio) pins 2,6
pin 4 (Video) pin 20


3. SCART cable for Atari 800 XL/XE - stereo:

DIN 5 m <-> SCART 21 m <-> Cinch m (R) -> Cinch m (L)
pin 2 (A R) apex
pin 6 (A L) apex
pin 4 (A GND) ring ring
pin 2 (GND) pin 17
pin 4 (Video) pin 20


4. simple A/V cable for Atari ST:

DIN 13 m <-> Cinch m (A) -> Cinch m (V)
pin 1 (A out) apex
pin 2 (V out) apex
pin 13 (GND) ring ring


5. SCART cable for Atari ST - normal:

DIN 13 m <-> SCART 21 m
pin 1 (A out) pins 2,6
pin 2 (V out) pin 20
pin 13 (GND) pins 4,17


6. SCART cable for Atari STE - RGB + stereo [source: ST info 5/1991]:

DIN 13 m <-> SCART 21 m <-> Cinch m (R) -> Cinch m (L)
pin 2 (A R) apex
pin 6 (A L) apex
pin 4 (A GND) ring ring
pin 2 (V out) pin 20
pin 6 (G) pin 11
pin 7 (R) pin 15
pin 10 (B) pin 7
pin 12 (v sync) pin 16
pin 13 (GND) pins 5,9,13,17


7. SCART cable for Atari Falcon030 [source: Ctirad Fertr]:

CANON 19 f <-> SCART 21 m <-> Cinch m (R) -> Cinch m (L)
pin 2 (A R) apex
pin 6 (A L) apex
pin 4 (A GND) ring ring
pin 1 (R) pin 15 {brown}
pin 2 (G) pin 11 {green}
pin 3 (B) pin 7 {yellow}
pin 12 (sync?) pin 20 {D white}
pin 16 (v sync) pin 8 {grey}
pins 5-8,10 (GND) pins 5,9,13,14,17,18


8. connection between Atari Falcon030/TT030 and Nixdorf Computer monitor [source: JAY]:

CANON 19 f <-> CANON 9 m
pin 1 (R) pin 2
pin 2 (G) pin 4
pin 3 (B) pin 14
pin 6 (GND R) pin 3
pin 7 (GND G) pin 5
pin 8 (GND B) pin 15
pin 10 (GND) pin 1
pin 13 (ID 0) pin 16
pin 14 (ID 1) pin 17


9. connection between Atari Falcon030/TT030 and Philips monitor [source: JRC]:

CANON 19 f <-> CANON 9 m <-> Cinch m
pin 1 (R) pin 3 {red}
pin 2 (G) pin 4 {green}
pin 3 (B) pin 5 {blue}
pin 5 (GND) pin 2 {brown}
pin 9 (audio) {yellow} apex
pin - (GND) pin - (shield) ring
pin 17 (+12 V) pin 7 {white}
pin 13 - connected via a diod to pin 17
pin 14 - connected via a diod to pin 17


10. A/V cable for Atari Jaguar [source: JRC]:

slot 26 f <-> Cinch m (R)
pin 1 (A R) apex
pin 3 (A R GND) ring
<-> Cinch m (L)
pin 2 (A L) apex
pin 4 (A L GND) ring
<-> Cinch m (V)
pin 21 (Video) apex
pin 19 (GND) ring


11. SCART cable for Atari Jaguar [source: JRC]:

slot 26 f <-> SCART 21 m <-> Cinch m (R) -> Cinch m (L)
pin 1 (A R) pin 1 apex
pin 2 (A L) pin 2 apex
pin 7 (R) pin 15 {red}
pin 10 (B) pin 7 {blue}
pin 12 (switch) pin 16 {black}
pin 14 (G) pin 11 {green}
pin 21 (video) pin 20 {yellow}
pin 22 (control) pin 8 {grey}
pin 13,19 (GND) 4,5,9,13,17,18 ring ring


12. extension SCART cable with separated sound lines [my invention]:

SCART 21 m <-> SCART 21 f
5,9,13 (GND) 5,9,13
14,17,18 (GND) 14,17,18
pin 7 (B) pin 7 {yellow}
pin 8 (control) pin 8 {white}
pin 11 (G) pin 11 {green}
pin 15 (R) pin 15 {brown}
pin 16 (switch) pin 16 {white}
pin 19 (V out) pin 19 {D white}
pin 20 (V in) pin 20 {grey}

Cinch m (R1) <-> SCART 21 m SCART 21 f <-> Cinch m (R1)
apex (A R1) pin 1 pin 1 (A R1) apex
ring (GND) pin 4 pin 4 (GND) ring
Cinch m (L1) <-> SCART 21 m SCART 21 f <-> Cinch m (L1)
apex (A L1) pin 3 pin 3 (A L1) apex
ring (GND) pin 4 pin 4 (GND) ring
Cinch m (R2) <-> SCART 21 m SCART 21 f <-> Cinch m (R2)
apex (A R2) pin 2 pin 2 (A R2) apex
ring (GND) pin 4 pin 4 (GND) ring
Cinch m (L2) <-> SCART 21 m SCART 21 f <-> Cinch m (L2)
apex (A L2) pin 6 pin 6 (A L2) apex
ring (GND) pin 4 pin 4 (GND) ring



DESCRIPTION OF IMPORTANT CONNECTORS

I. Communication ports

1. CANON 25 (= paraller printer):

a) Male (= cable):

01 02 03 04 05 06 07 08 09 10 11 12 13
-----------------------------------------------------
\ * * * * * * * * * * * * * /
\ * * * * * * * * * * * * /
-------------------------------------------------
14 15 16 17 18 19 20 21 22 23 24 25

b) Female (= computer, printer):

13 12 11 10 09 08 07 06 05 04 03 02 01
-----------------------------------------------------
\ * * * * * * * * * * * * * /
\ * * * * * * * * * * * * /
-------------------------------------------------
25 24 23 22 21 20 19 18 17 16 15 14

c) Pin list (source: Joy AIP, Konektory PC):
01 - Strobe
02 - Data 0
03 - Data 1
04 - Data 2
05 - Data 3
06 - Data 4
07 - Data 5
08 - Data 6
09 - Data 7
10 - Acknowledge [only on Falcon !]
11 - Bussy
12 - Paper End [only on PC !!!]
13 - Select [only on PC !!!]
14 - Autofeed {only on PC !!!]
15 - Error [only on PC !!!]
16 - Initialize Printer [only on PC !!!]
17 - Select Input [only on Falcon !]
18 - GND
19 - GND
20 - GND
21 - GND
22 - GND
23 - GND
24 - GND
25 - GND


2. CANON 25 (= serial modem RS-232):

a) Male (= computer):

01 02 03 04 05 06 07 08 09 10 11 12 13
-----------------------------------------------------
\ * * * * * * * * * * * * * /
\ * * * * * * * * * * * * /
-------------------------------------------------
14 15 16 17 18 19 20 21 22 23 24 25

b) Female (= cable, modem):

13 12 11 10 09 08 07 06 05 04 03 02 01
-----------------------------------------------------
\ * * * * * * * * * * * * * /
\ * * * * * * * * * * * * /
-------------------------------------------------
25 24 23 22 21 20 19 18 17 16 15 14

c) Pin list (source: Joy AIP, Konektory PC):
01 - CG
02 - TxD (Transmitted Data)
03 - RxD (Ricieved Data)
04 - RTS (Request to Send)
05 - CTS (Cler to Send)
06 - DSR (Data Set Ready)
07 - SG / GND
08 - DCD (Carrier Detect)
09 - DST
10 - Test
11 - not used
12 - SDOD
13 - SCTS
14 - STxD
15 - TxC
16 - SRxD
17 - RxC
18 - not used
19 - SRTS
20 - DTR (Data Terminal Ready)
21 - SQ
22 - RI (Ring Indicator)
23 - CH/CI
24 - XTC
25 - not used


3. CANON 9 (= serial modem RS-232)

a) Male (= computer):

1 2 3 4 5
-------------
\ * * * * * /
\ * * * * /
---------
6 7 8 9

b) Female (= cable):

5 4 3 2 1
-------------
\ * * * * * /
\ * * * * /
---------
9 8 7 6

c) Pin list (source: Joy AIP, Konektory PC):
1 - DCD (Carrier Detect)
2 - Rxd (Ricieved Data)
3 - TxD (Transmitted Data)
4 - DTR (Data Terminal Ready)
5 - GND
6 - DSR (Data Set Ready)
7 - RTS (Request to Send)
8 - CTS (Clear to Send)
9 - RI (Ring Indicator)


4. CANON 9 (= standard joy port):

a) Male (= computer):

1 2 3 4 5
-------------
\ * * * * * /
\ * * * * /
---------
6 7 8 9

b) Female (= cable):

5 4 3 2 1
-------------
\ * * * * * /
\ * * * * /
---------
9 8 7 6

c) Pin list (source: Joy AIP, XE manual): normal / ST mouse
1 - UP
2 - DOWN
3 - LEFT
4 - RIGHT
5 - Paddle Y / middle button (?)
6 - FIRE / left button
7 - +5 V
8 - GND
9 - Paddle X / right button


5. CANON 15/DB 15 (= STE + Falcon enhanced joy port):

a) Male (= cable):

01 02 03 04 05
--------------------------
\ * * * * * /
06 \ * * * * * / 10
\ * * * * * /
--------------------
11 12 13 14 15

b) Female (= computer):

05 04 03 02 01
--------------------------
\ * * * * * /
10 \ * * * * * / 06
\ * * * * * /
--------------------
15 14 13 12 11

c) Pin list (source: Joy AIP): port A / port B
01 - UP 0 / UP 1
02 - DOWN 0 / DOWN 1
03 - LEFT 0 / LEFT 1
04 - RIGHT 0 / RIGHT 1
05 - Paddle 0 Y / Paddle 1 Y
06 - FIRE 0, Light Gun / FIRE 1
07 - +5 V (VDC) / +5 V
08 - not used / not used
09 - GND / GND
10 - FIRE 2 / FIRE 3
11 - UP 2 / UP 3
12 - DOWN 2 / DOWN 3
13 - LEFT 2 / LEFT 3
14 - RIGHT 2 / RIGHT 3
15 - Paddle 0 X / Paddle 1 X


6. SIO 13 (= XL/XE serial I/O bus)

a) Male (= computer, peripherals):

02 04 06 08 10 12
-------------------------
/ * * * * * * \
/ * * * * * * * \
-----------------------------
01 03 05 07 09 11 13

b) Female (= cable):

12 10 08 06 04 02
-------------------------
/ * * * * * * \
/ * * * * * * * \
-----------------------------
13 11 09 07 05 03 01

c) Pin list (source: XE manual):
01 - Clock input
02 - Clock output
03 - Data input
04 - GND
05 - Data output
06 - GND
07 - Command
08 - Motor Control
09 - Proceed
10 - + 5 V / Ready
11 - Audio in
12 - not used (+ 12 V)
13 - Interrupt


II. Audio/Video Ports

1. SCART 21 (= I/O A/V on TV and some monitors):

a) Male (= cable):

02 04 06 08 10 12 14 16 18 20
--------------------------------------------
| | | | | | | | | | | /
| | | | | | | | | | | |
-------------------------------------------
01 03 05 07 09 11 13 15 17 19 21

b) Female (= TV, monitor, videorecorders, ...):

20 18 16 14 12 10 08 06 04 02
--------------------------------------------
\ | | | | | | | | | | |
| | | | | | | | | | | |
-------------------------------------------
21 19 17 15 13 11 09 07 05 03 01

c) Pin list (source: OTF COLOR 462 STEREO manual):
01 - Audio out R
02 - Audio in R
03 - Audio out L
04 - GND audio
05 - GND B
06 - Audio in L
07 - B in
08 - control signal input (switching signal of TV/monitor modes)
09 - GND G
10 - not used
11 - G in
12 - not used
13 - GND R
14 - GND (date line)
15 - R in
16 - input for switching signal R, G, B
17 - GND (video)
18 - GND (switching signal)
19 - Video out
20 - Video in
21 - GND (shield)


2. DIN 5 (= XL/XE monitor):

a) Male (= cable):

__ __
1 / U \ 3
/ * * \
4 | * * | 5
\ * /
\_____/
2

a) Female (= computer):

__ __
3 / U \ 1
/ * * \
5 | * * | 4
\ * /
\_____/
2

c) Pin list (source: XE manual):
1 - Composite Luminance
2 - GND
3 - Audio out
4 - Composite Video out
5 - Composite Chroma (Color + Burst)


3. DIN 13 (= ST monitor):

a) Male (= cable):

01 02 03 04
-------------
/ * * * * \
05 / \ 08
| * * * * |
| |
09 \ * * * * / 12
\ * /
-------------
13

b) Female (= computer):

04 03 02 01
-------------
/ * * * * \
08 / \ 05
| * * * * |
| |
12 \ * * * * / 09
\ * /
-------------
13

c) Pin list (source: Joy AIP):
01 - Audio out
02 - Video out
03 - Clock select
04 - Monochrom detect
05 - Audio in
06 - G
07 - R
08 - not used
09 - Horizontal Sync
10 - B
11 - Monochrom out
12 - Vertical Sync
13 - GND

[Note: Pin 2 is not used in computers without TV modulator !!!]


4. CANON 19 (= Falcon030 monitor):

a) Male (= computer):

01 02 03 04 05 06 07 08 09 10
-----------------------------------------
\ * * * * * * * * * * /
\ * * * * * * * * * /
-------------------------------------
11 12 13 14 15 16 17 18 19

b) Female (= cable):

10 09 08 07 06 05 04 03 02 01
-----------------------------------------
\ * * * * * * * * * * /
\ * * * * * * * * * /
-------------------------------------
19 18 17 16 15 14 13 12 11


c) Pin list (tested!):
01 - R
02 - G
03 - B
04 - Mono/Overlay
05 - GND
06 - GND R
07 - GND G
08 - GND B
09 - Audio out
10 - GND
11 - GND
12 - Composite Sync/Video
13 - Horizontal Sync
14 - Vertical Sync
15 - External Clock Input
16 - External SYNC Enable
17 - +12 V
18 - M1
19 - M0

[Note: In some Falcon dokumentation the rows of CANON 19 are reversed !!!]


5. CANON 15/DB 15 (= TT030 VGA monitor port):

a) Male (= cable):

01 02 03 04 05
--------------------------
\ * * * * * /
06 \ * * * * * / 10
\ * * * * * /
--------------------
11 12 13 14 15

b) Female (= computer):

05 04 03 02 01
--------------------------
\ * * * * * /
10 \ * * * * * / 06
\ * * * * * /
--------------------
15 14 13 12 11

c) Pin list (source: Joy AIP): port A / port B
01 - R
02 - G
03 - B
04 - Monitor-ID-Bit2
05 - not used
06 - GND R
07 - GND G
08 - GND B
09 - coding
10 - GND sync
11 - Monitor-ID-Bit0
12 - Monitor-ID-Bit1
13 - Horizontal Sync
14 - Vertical Sync
15 - not used


6. slot 26 (= Jaguar A/V port):

a) Female (= cable):

26 24 22 20 18 16 14 12 10 08 06 04 02
---------------------------------------
| | | | | | | | | | | | | | |
| |
| | | | | | | | | | | | | | |
---------------------------------------
25 23 21 19 17 15 13 11 09 07 05 03 01

b) Pin list (not completed!):
01 - Audio out R
02 - Audio out L
03 - GND audio R
04 - GND audio L
05 - ???
06 - ???
07 - ???
08 - ???
09 - ???
10 - B out
11 - ???
12 - +2.7 V; output for switching signal R, G, B (???)
13 - GND
14 - G out
15 - ???
16 - ???
17 - ???
18 - ???
19 - GND video
20 - ???
21 - Video out
22 - +14 V; control mode signal - switching of TV/monitor modes (???)
23 - ???
24 - ???
25 - ???
26 - ???
Atari 130XE, Atari 800XL, Amiga 1200 Tower TF12060, Amiga 1200 Tower TF12030, Commodore C128, ZX Spectrum +2 Grey, ZX Spectrum +48, ZX Spectrum +3